Power Signal Generator

Conducted Immunity

PSG-300

The PSG-300 contains a linear precision power amplifier with a wide bandwidth (DC-300 kHz), suitable for all applications concerning fast alternating signals at high output power. The built in generator provides sine, square and triangle waves. Communication between PSG-300 and PC is via USB connection. The application software is suited for general power generator applications and for immunity tests according to IEC/EN 61000-4-16 as well as to IEC/EN 61543. Short term tests are enabled by phase controlled switching of an external power source (optional). The PSG-300 is equipped with a silent, temperature-controlled fan. Internal safeguards protect the amplifier from overheating and high power dissipation. They also assure protection against short-circuits and overload.

The number one choice for all applications with the need for fast and powerful signals, e. g.:

Simulation of DC / AC supply lines

Control of piezo actors

Generation of magnetic fields with Helmholtz or similar coils

Immunity testing according to IEC/EN 61000-4-16, IEC/EN 61000-4-19 AND IEC/EN 61543

Calibration devices etc.

Features

Short circuit and overload protection

Completely linear and low noise design

Outstanding DC stability

Over temperature switch off

Protection / Ready LED

EUT-fail input

EUT-monitor input

Technical specifications PSG-300 PSG-300A
Amplifier
Power bandwidth DC – 200 kHz
Slew rate 100 V/μs
Offset ±1 mV (±0.1 mV/°C)
Gain 10 ±0.1 % (±0.01 %/°C)
Output voltage 50 Veff / ±75 Vpeak
Output current 5 Aeff / ±7.5 Apeak 16 Aeff / ±23 Apeak
Power output 250 W 800 W
Distortion < 0.10%
Input impedance 100 k  Ω
Max. input voltage 80 V (cont.), 100 V (< 1 min)
Noise (10 Hz – 1 MHz, input: 50 ohm) 0.5 mVeff
Output connector 4 mm MC
Output connector 50 ohm BNC
Generator
Frequency range DC, 0.05 Hz – 300 kHz
Frequency resolution 0.05 Hz
Frequency accuracy ± 20 ppm
Waveform Sine, square, triangle
External generator input BNC
 General data
Remote control USB connector
Dimension (LxWxD) 448,9×132.55×435.50mm 448.90 x 177 x 585.50 mm
Weight approx. 14 kg approx. 30 kg
Technical specifications PSG-300 PSG-300A
Options
PSG-E300 External power source for short term test 300V@DC, 162/3Hz, 50Hz, 60Hz
PSG-EXT Input connector for phase controlled switching of external power source
Menu

Copyrighted Image