Antennas
Accessories
Type ERC-6 – Frequency range 9 kHz – 6 GHz
Description
Although the „ERC-6“ is the less expensive little brother of our flagship „ERX-6“, it is more than worth to have an intensive look on it.
With the ERC-6 only properties, that are not required for full-compliance EMI measurements according to CSPR 16-1, have been reduced or omitted.
The ERC-6 is therefore a good alternative to the „high-end-devices“ for many users, such as in-house developing departments.
The Receiver can either be operated via the integrated touch-PC with 10“ monitor or by external software.
The external software enables fully automated measurements including automatic control of antenna mast and turntable.
Also the fast, FFT-based (time domain) measuring mode is already included in the ERC-6.
Type ERX-6 – Frequency range: 10 Hz – 6 GHz
The new Full Compliance ERX-6 EMI test receiver from Frankonia is suitable for mobile use as well as for use in systems. The ERX-6 offers a very high measuring speed so that e.g. the measurement is reduced from hours to seconds with the Quasipeak detector for emission measurements. By default, the ERX-6 is equipped with hardware that significantly accelerates the measurement according to the standards CISPR 16-1-1 Ed 3.1 and MIL461G (FFT-based measuring instrument). For standards that do not provide acceleration using the FFT-based measuring instrument, the ERX-6 has a classic stepped scan mode. In addition, it is possible to perform measurements at individual frequency points, as described e.g. at the final maximization. In conjunction with the PROVE-EMC software, the receiver can significantly improve the measurement quality and reduce the test times in conjunction with the antenna mast and turntable. Due to the excellent noise floor of <-12 dBuV (band C / D) or – 3dBuV (band E) even difficult measuring tasks can be solved, without the need for an external preamplifier. The functional scope is rounded off by a very fast spectrum analyzer as well as a high-resolution scope function.
